What are the risk factors involved in tree removal?

When removing the tree in parts, industrial climbers are involved in the work, who cut the tree into pieces, starting from the top. The pieces are thrown off onto a previously cleaned and, to avoid damage to the soil layer, protected by the flooring of branches or boards. A more complicated option is to remove the tree with the descent of the parts. Beginners have nothing to do here. Only highly qualified industrial climbers can work. Removal of fragments with descent is necessary in case of limited space or the presence of specific factors (closely laid power lines, buildings, landscape design elements, etc.).

Before starting work, Tree Removal Calabasas hang down ropes. The work begins with pruning branches and crowns. Then the climber begins to see the trunk with a safety net so that its fragments hang on the rope below the climber. Then they gently descend to the ground along a given trajectory. Removing the spruce in parts with the descent of the tree in parts by lowering fragments through a neighboring tree allows you to carry out the work even more accurately. In this case, the block with the release ropes is attached to one or several neighboring trees, which makes it possible to avoid the pendulum trajectory and, accordingly, damage that can be caused by the lowered parts of the tree.

Such a cut is used if a tree grows next to a house, it can damage buildings or healthy trees with uncontrolled pendulum swinging of parts. Such a roll is the safest for climbers carrying out work but also requires their highest qualifications. The cutting of a tree from a car tower is carried out if the tree is recognized as an emergency, i.e. it has rot or a deep vertical crack - in any case, it is dangerous for a person who is on it or under it.

Let's assume that a neat cut of a tree next to the house has been made. And it seems that the job is done, there is a small pretty stump left. But the next year, the root system begins to give rapid growth, which is not very easy to cope with. It is good if we are talking about high-rise buildings, in the courtyard of which new plantings will replace remote emergency trees. If the site has a different purpose and should remain flat, then the stump and root system should be uprooted in advance.

All work on the removal of trees refers to dangerous work, which should only be carried out by Tree Service Pacific Palisades. You can, of course, save money and hire a team of handymen, but who will then be responsible for the fall of a tree in the opposite direction to a given trajectory, and, in the worst case, self-mutilation? Do not risk your property, aesthetics, and peace of mind! Contact professionals who will do all the work accurately, promptly, and painlessly for the environment! 

What is the process of tree removal?

In urban conditions, conditions of a private plot or a garden and park zone, artificial removal of trees are necessary. No one needs a sick tree to fall on a power line, break windows in a neighbouring house or crush a nearby car. In this regard, the felling of trees takes place in compliance with certain rules.

Deleting the entire tree

This option is possible if the tree has a natural slope, and there is enough free space for a painless fall. Most likely, you will not need to involve sophisticated equipment, a team of Tree Trimming Beverly Hills - industrial climbers, and other measures. Unfortunately, this case is rather an exception. Much more often we have to come up with other ways.

Removing the entire tree with guide rods

Felling a tree entirely with guide rods is convenient for use in limited areas, but where it is possible to choose the trajectory of its fall. The process takes place with the involvement of climbers, whose task is to fix the guy-rope in the upper part of the crown of the tree. In the trunk from the side into which the tree should fall, a wedge is cut out and an inscription is made from the opposite side. Thus, the tree begins to fall, and the whole process is controlled by a drawbar, which can be fixed, for example, on a winch.

Removal of the tree in parts with dropping or with the descent of parts.

The removal of a tree by climbers using rope railings is used if at least two strong trees grow nearby, between which ropes can be stretched, and the sawn tree is laid on such "railings". In the future, by analogy with the drawback, the tree can be laid on the ground or disassembled in a hanging state.

Before the landscaping of the site, there is often a need to cut down dry trees. Such work is also carried out on the territory with Tree Removal Brentwood if an emergency object is detected.
The execution of works by experienced craftsmen is:
•    compliance with safety regulations;
•    no risk of damage to wires and communications;
•    whole flower beds and lawns;
•    a clean playground – without stumps and splinters.

Before performing the work, the arborist examines the tree plantations that need to be removed, as well as the territory, and selects the appropriate method and technical means. You can order the cutting of large-sized trees and shrubs, and the removal of stumps in an undeveloped area, near buildings, or on a landscaped plot.
Depending on the situation, the work is performed in one of the following ways:
•    without dividing the trunk into parts – in free spacious territories;
•    separate elements without hanging – if there is a free space at the bottom;
•    With hanging – near the building, above the roofs, gazebos.

Stumps are removed using a winch or special equipment, felling waste is loaded onto transport and exported. The price for standard operations can be viewed on the website. The total amount is calculated separately for each order, taking into account the height and diameter of the barrel, the method of removal, and volume.